Switch to english versionsprache de grau

Synology DS220+ Review

5 of 5 (1 Vote)

\"Synologie

\r\n

The brand-new successor to the Synologie 918+ is the 220+. Basically, not much has changed. It is a little faster and uses a little less power. The additional 50 euros should be worth it to anyone. Recently, the volume of data has increased enormously. Over the years, smaller NAS devices and other external USB or network drives containing videos, photos and documents have become completely full. It was time for a new data backup solution. There are now plenty of solutions available, ranging from inexpensive to rather costly. Cheap suppliers from China have also recently appeared on the NAS market. But would you really trust them with the secure storage of your important data? Probably not. I had actually had good experiences with my old Synologie DS209, as well as with a WD NAS. I decided to go with Synology again because, in my opinion, its products best meet my requirements. The server costs from 550 euros without drives. Depending on how much you want to spend, the Synology 220+ can be fitted with hard drives of different capacities. But should you go for 4x4, 4 TB, or better 4×12 TB? That can quickly push the price into the considerable four-figure range. I chose the golden middle ground with 4×4 8 TB hard drives. In retrospect, that was a mistake. I had not expected the NAS system in RAID 1 to use up 2 TB on each drive. The NAS was quick to install. The four hard drives simply slide into their bays. There was no proper operating manual for the NAS, just a small leaflet explaining how to install the drives. Once the NAS is connected to the network, there are several ways to find it. The easiest is to use the Synologie Assistant. This is a free program that scans the network for Synologie systems and displays their IP addresses. Double-clicking the address opens the web browser, where the Synologie can be configured. As long as the hard drives have not been set up, the top LED flashes continuously; it goes out once all the settings have been completed. As usual, the Synologie web interface is neatly laid out and easy to navigate. The four hard drives were easy to configure. If that still seems too complicated, there are plenty of YouTube videos that explain installation and setup clearly. The Synology 220+ NAS offers an almost endless range of possibilities, most of which I do not need myself, since data backup is my main priority. The Synology 220+ can be used as a media server, control surveillance cameras, provide remote access and much more. There is free software for the system and plenty of mobile apps.

Conclusion: The Synology 220+ has been running on my network for a few months now. There have not been any major problems so far. Data transfer speeds are surprisingly good, and despite having two fans, the device is quiet even during continuous operation. There are still problems with the IP camera (it worked for one day and then was no longer recognised), and the home cinema system cannot find the NAS on the network. I am sure there is a solution to that as well. Despite the high total purchase price of almost 1,600 euros (including the 4×8 TB hard drives), I can recommend the device.

\r\n

 

Add comment

Submit

Found nothing?

Latest Comments